Computer Software
Speed
Control
Start/
Run
Manual Jog
Y Axis
Reset
Manual Jog
X Axis
Stop/
Pause
MDS - PROGRAMMABLE SHAPE MACHINE
A QUALITY PRODUCT FROM BUG-O SYSTEMS • 280 TECHNOLOGY DRIVE • CANONSBURG, PA USA 15317-9564
A DIVISION OF WELD TOOLING CORPORATION © Weld Tooling Corp. ROM 1:16 Litho. in U.S.A. LIT-MDSPSM-BRO-0713
The MDS-Programmable Shape Machine can be
programmed from a PC, using either of two software
packages described below. Shapes can be created offline, and downloaded to the machine when required. A
cable is supplied to connect to the serial port of the PC.
1. PC Option / BUG-6140
This runs under Windows, and allows you to:
• Create shapes on the PC.
• Save any number of shapes to disk, and retrieve
them as necessary.
• View a programmed shape on screen - which
helps program verification.
• Download programmed shapes from the PC to
the machine.
2. BUG-6240 CAD Interface
This is a complete package that includes both the
PC option and DeskCNC. This will allow you to take
2 dimensional CAD drawings and convert them to
Shape files that you can directly load into your shape
machine.
• DeskCNC is used to modify 2 dimensional CAD
drawings (.DXF files) and create a toolpath
• The toolpath is saved as a shape file using
DeskCNC
• The shape file can be loaded in the PC
| Brand |
BUG-O SYSTEMS |
| Power |
120 VAC / 50-60 Hz / 1 Ph |
| Power |
240 VAC / 50-60 Hz / 1 Ph |
| Travel Speed |
5-100 ipm (127-2540 mm/min) |
| Net Weight of Kit |
45 lbs. (20.41 kg) |
| Cross Travel |
24" (610 mm) |
| Max. Line Segment Dimension |
72" (1828 mm) Within Limits of Travel |
| Min. Increment Dimension |
.01" (0.3 mm) |
| Delay Increment |
.01 seconds |