1) Body：It is the frame of the machine and the carrier of other parts.
2) Driving part: It is the device to drive trolley. The part is constituted of four rubber rims, angle gear, chain, chain pulley.
3) X-Y slide: It is used to adjust the position of welding torch. In the welding process, you can adjust welding torch up and down a little.
4) Swing device of welding torch: Make the welding torch weld in swing model.
5) Grip device of welding torch: It is used to grip welding torch. It is convenient to repair, adjust it.
6) Magnetron hand grip: It makes trolley equipped and moved easily. It is equipped with permanent magnet to avoid running away welding line.
7) Guide wheel: Roll along base metal to guide the right welding position.
8) Control box: By it, you can adjust all the movement of trolley.
9) Inductive stop switch: After welding the end of workpiece, trolley stops because the switch is activated.
| size |
430mm×280mm×290mm |
| Swing motor |
DC24V |
| driving method |
Four rims driving（Rubber rim） |
| Walk speed |
50～1900mm/min（Display by nixie tube） |